Big driving type cold paint road marking machine

Engine 37HPDriving speedForward:0-22km/h; back off:0-12km/h;Paint pumpMaximum flow per pump:20L/min.Maximum flow per pump20MpPaint tank500KGSpray gunSpraying width:100-1000mmDisplacement of air compressor0.6m3/minControl systemTT-KZ300 PLC micro-electronic control systemSize&weight5300mm(L)*1650mm(W)2300mm(H).2500kg 1. Engine: 31Kw water-cooled electric- startup diesel engine with four - cylinder inline, low noise and environment protection has indication of water temperature, voltage and engine oil. Maximum revolution speed: 3000rpm. Fuel tank`s cubage: 50L. 2. Driving system: The original imported variable speed transmission system with automatic brake device. Flexible operated in forward, back off or stop (HTS). 3. Driving speed: Forward: 0-22km/h; back off: 0-12km/h; Max climbing capacity: 20°. 4. Paint pump: Equipped with double hydraulic driven plunger pump. Max flow of single pump: 20L/min. Max spraying pressure: 20Mpa. 5. Spray gun: Equip with three new type pneumatic spray guns and one lengthening-pipe hand spray gun, with hard side columnar reverse wastewater nozzles (30/20), which make the site discharging fast and easy.Non-arc nozzle makes the line straight.Start four guns at the same time if construction needs.Spraying width: 100-1000mm. 6. Available paint: for the spraying of cold solvent, water-based and two-component road marking paint. 7. Glass beads spraying system: Option for single or double spray guns if construction needs.Displacement of air compressor: 0.6m3/min. 8. Glass beads bin: Single or double bins with windows can check the quantity of glass beads in time, which makes sure continuous spraying of glass beads. Capacity of each bin: 200kg. 9. Control system: Equipped with TT - KZ200 PLC micro - electronic control system.which can freely set the line type of single actual line, double - actual line and other broken line. According to the needs of customer, option for the measure device for consumption of paint, total length and total square and thickness which make the spraying work convenient and fast. 10. Chassis: Firm welding frame, four wheel structure. The wheels are all gas filled abrasion resistance wheels. Diameter: 630mm. Operator sit on the chair to operate through hydraulic strengthen steering wheel (equipped in left or right according to the needs of customer), easy and freely.Stable brake system makes the driving safer. 11. Paint tank: equipped with double paint tanks which are made of cold-rolling oxidation resistant steel. The capacity of each tank: 300KG. 12. Gun bracket and pre-marking system: same with the parameters of TT-DCZ-II. 13. Guide rod: freely adjust up, down, left and right. 14. Alarming function: adjustable alarm lamp with flicker frequency together with the electronic warning arrow on the machine (the arrow direction is adjustable improves the safety of road marking construction). 15. Size Weight: 5200mm (length)*1880mm (width)*1650mm (height).2050kg.