Hand-Push Cold Solvent Road Marking Machine

1. Engine: Original imported Japanese Robin 6.0hp four-stroke air-cooled gasoline engine. 2. Chassis: Firm welding frame, whose surface has been settled by chrome-plated or painting treatment, fix with high speed imported bearing, to make the whole machine more lightness. 3. Rubber wheel: Left and right tyres are all gas filled vacuum wheels, diameter 350mm. Front guide tyre is special abrasion resistance modified rubber tyre with the diameter of 190mm. 4 .Front tyre guide arm: Lock the front tyre direction device, which makes sure the marking machine walking in straight line or turning freely. 5. Guide rod: Up, down, left, right freely adjustable. 6. Paint pump: Single new type hydraulic piston high pressure airless pump runs stably, which is suitable for cold plastic road marking paint .Big flow, stable pressure. Max pressure 20mpa (working pressure 10-15mpa), max flow 12.5L/min. 7. Paint tank (optional): The capacity 80Kg.Fix with sieve inside, and with filter at feeding port fix. 8.Spray gun: Double new type manual spray guns, fix with hard side columnar reverse wastewater nozzles, to make the site discharge fast and easy. Non-arc nozzle makes the line straight. Manual brake controller makes the change between single and double flexible. 9 .Spraying width: 100-450mm. 10 .Size?Weight: 1500 mm (length)*720 mm (width)* 1040 mm (height)* 121kg (not including of coating tank). Operator sitting chair TT-ZT-II is optional to realize self-propel. B type equipped with air-compressor, glass beads pressurized storage, glass beads spray gun, and glass beads spray control system and stainless spray system to meet the needs of water paint construction. Except all the functions of B type, C type equips with a micro-electric control system, which consists of Micro-electric controller, on-off coder, electromagnet, special gun bracket and so on. This system can be set four kinds of marking way according to the national road marking standard, and realized fully automatic control.