Vibrating (Convex)Thermoplastic road marking paint

1. Perfect molding and good crushing resistance. High-strength resin, mixed with high quality pigment,stuffing and imported additive such as heat resistant agent, levelling agent and firming agent and so on, which ensures the excellent profile molding effects in the construction, and which makes the line with high abrasion resistance and impact resistance, and without flaking or deforming for long time use. 2. Gorgeous colors and high weather resistance:The imported rutile type titanium pigment (white) or heat resistance chrome yellow (yellow), mixed with high quality structural pigment and anti-ultraviolet additive, which ensures the line with the features of anti-acid, anti- alkali, anti-fouling, gorgeous colors and high weather resistance, etc. 3. Drying fast: When the temperature is 20°C and the relative humidity is 40%, the drying time of marking surface is no more than 3minutes and the construction seldom pollute the environment. 4. Construction conditions:The suitable construction temperature for the paint is 180°C to 220 °C and the suitable environment temperature is 5°C to 40°C. The relative humidity should be below 70%. If the temperature and humidity is excessive differential to the above data range, the construction temperature and speed should be appropriately adjusted. The road surface must be kept clean and dry during the construction. It is recommended that separate special primer produced by our company should be coordinated with when construction on the cement concrete and asphalt road. 5. Paint consumption:Profiled road markings obtain square, bar and multi-dot ones. Different patterns require different paint consumption. Take the universal square profiled line for example. When the applied profiled size is 5×4.5×0.5cm and the space size is twice the block size, the paint consumption per square is about 5kg. The paint consumption varies according to the profiled pattern, profiled size and space size.